Thank You!

Your switches are on the way

Orro Switch Specs

Here are the hard details on the specs that make the Orro Switch the smart choice for the future of lighting in your home.

Sensors

  • (1) Passive infrared motion detector with custom Fresnel lens for wide field-of-view (FoV)

  • (1) Ambient light sensor

  • (1) Active proximity sensor

  • (2) Far-field microphones

Interfaces

  • Touchscreen

    • Touch-enabled IPS-panel display
    • Multi-touch gesture support
    • 215 x 432 resolution at 279 pixel-per-inch (PPI)
    • Vertically-oriented 1.73in/44mm diagonal
  • Built-in Speaker

  • Mechanical rocker switch for manual control of lights (on/off/light level adjustments)Independant of the software layer for reliability

  • Indicator RGB LED

Processor

  • Dual Core 800Mhz Processor

  • 1GB RAM

  • 8GB EMMC

Connectivity

  • 802.11b/g/n 2.4 GHz WiFi (DHCP dynamic IP addressing)

  • Bluetooth Low Energy (BLE)

Dimensions + Weight

  • Switch: H 4.13 in (105 mm), W 1.75 in (44.5 mm), T 1.73 in (44 mm)

  • 1-Gang installed configuration with an Orro wall-plate: H 4.68 in (119 mm), W 2.9 in (74 mm), T 1.73 in (44 mm)

  • Weight: 6.2.oz (175g)

Materials + Finishes

  • Orro Switch

    • Color: Black
    • Front Surface: Corning Gorilla Glass
    • Housing: Cast + Polished Zinc, ABS
  • Faceplate

    • Color: White
    • ABS

Certifications & Compliance

  • FCC

  • RHOS

Compatability

  • Replaces a standard single-gang light switch or dimmer

  • Neutral wire required

  • Ground wire required

  • Fits along side any other switch.

  • Supports single-pole configuration

  • For indoor-use only

  • For use in dry locations only

Multi-way Support

  • Currently not supported in sofware. Hardware supported.

  • Multi-way support will come in the future and will require Orro switches on all outlets in a multi-way setup

Voltage Requirement

  • 120V AC / 60Hz compatible (not for use with 220V/240V or 50Hz circuits)

Compatible Bulbs and Fixtures

  • LED, Incandescent, Halogen, CFL, MLV, ELV

Power Ratings

  • 1-gang:

    • Incandescent: 500W
    • Halogen: 500W
    • LED: 150W
    • CFL: 150W
    • MLV/ELV fixtures: 300W
  • Multi-gang:

    • Incandescent: 350W
    • Halogen: 350W
    • LED: 150W
    • CFL: 150W
    • MLV/ELV fixtures: 300W

Not Compatible With

  • Junction boxes with no Neutral wire

  • Fans and light fixtures with built-in fans

  • Appliances and non-lighting uses

  • Outdoor locations

  • Damp locations

Safety

  • Airgap switch for added safety when changing bulbs

Warranty

In the box

  • (1) Orro Switch
  • (1) Wall Plate
  • (4) Extension Wires
  • (4) Wire Connectors
  • (2) Mounting Screws
  • (2) Plate Screws
  • (4) Wire Labels